--- /dev/null
+#!/bin/dash
+#
+# Stefan Huber <shuber2@gmail.com>
+# Display battery info for conky
+
+
+
+if [ -e /sys/devices/platform/smapi/ ]
+then
+ for b in `find /sys/devices/platform/smapi/ -type d -name BAT?`
+ do
+ if [ `cat $b/installed` = "1" ]
+ then
+ name=${b##*/}
+ remcap=`cat $b/remaining_capacity`
+ remcapper=`cat $b/remaining_percent`
+ ratenow=`cat $b/power_now`
+ rateavg=`cat $b/power_avg`
+ remtime=`cat $b/remaining_running_time`
+ tempmilli=`cat $b/temperature`
+ temp=`echo "$tempmilli/1000" | bc`
+
+ if [ "$remtime" = "not_discharging" ]; then
+ remtime=`cat $b/remaining_charging_time`
+ fi
+ if [ "$remtime" = "not_charging" ]; then
+ remtime="--"
+ fi
+
+ echo "$name rate: $ratenow mW [~ $rateavg mW]"
+ echo "rem: $remcap mWh [$remcapper%, $remtime min]"
+ #echo "$name temp: $temp°C"
+ fi
+ done
+else
+ for b in `find /proc/acpi/battery/ -type d -name BAT?`
+ do
+ if [ `grep -c -E "^present: *yes" $b/state` = "1" ]
+ then
+ name=${b##*/}
+ fullcap=`grep "last full capacity" $b/info | awk ' { print $4 } '`
+ remcap=`grep "remaining capacity" $b/state | awk ' { print $3 } '`
+ rate=`grep "present rate" $b/state | awk ' { print $3 } '`
+
+ if [ $rate = "0" ]; then
+ remtime="--"
+ else
+ remtime=`echo "$remcap*60/$rate" | bc`
+ fi
+
+ remcapper=`echo "$remcap*100/$fullcap" | bc `
+
+ echo "$name rate: $rate mW"
+ echo "$name rem.: $remcap mWh [$remcapper%, $remtime min]"
+ fi
+ done
+fi
+
+
-alignment top_left
-gap_x 0
-gap_y 35
-maximum_width 200
-#minimum_size 200
-
-update_interval 2
-cpu_avg_samples 2
-net_avg_samples 2
-
-# for the green bg
-#default_color 563
-#color0 221
-#color1 894
-# for the blue bg
-default_color bbb
-color0 fff
-color1 b94
-draw_shades no
-use_spacer left
-top_name_width 13
-default_bar_size 85 5
-
-if_up_strictness address
-short_units yes
-no_buffers yes
-
-double_buffer yes
-own_window yes
-own_window_transparent yes
-own_window_type normal
-own_window_hints sticky, below, undecorated, skip_taskbar, skip_pager
-own_window_colour 082140
-
-use_xft yes
-xftfont DejaVu Sans Mono:size=7.5
-#xftalpha 0.8
-
-
-
-# Usr ${execi 6 who | cut -d " " -f 1 - | sort -u | wc -l}
-
-
-TEXT
-${color0}${font Arial:size=12}Gentoo Linux$font $alignr${kernel}$color
-$alignr$acpitemp°C
-$color${font DejaVu Sans Mono:bold:size=8}${cpu cpu1}% ${cpu cpu2}% ${cpu cpu3}% ${cpu cpu4}%$alignr$mem ($memperc%)$font
-${cpugraph cpu1 20,32} ${cpugraph cpu2 20,32} ${cpugraph cpu3 20,32} ${cpugraph cpu4 20,32} $alignr${color1}${memgraph 20,32}$color
-
-${color0}${font DejaVu Sans:size=10}eth0: $font${if_up eth0}${addr eth0}$endif ${execi 2 ~/.conky/eth0info.sh} ${hr 3}$color ${if_up eth0}
+-- vim: ts=4 sw=4 noet ai cindent syntax=lua
+
+conky.config = {
+ alignment = 'top_left',
+ gap_x = 10,
+ gap_y = 50,
+ maximum_width = 340,
+
+ update_interval = 2,
+ cpu_avg_samples = 2,
+ net_avg_samples = 2,
+
+ default_color = '444',
+ color0 = '000',
+ color1 = '222',
+
+ draw_shades = false,
+ use_spacer = 'left',
+ top_name_width = 13,
+
+ if_up_strictness = 'address',
+ short_units = true,
+ no_buffers = true,
+
+ double_buffer = true,
+ own_window = true,
+ own_window_class = 'Conky',
+ own_window_type = 'dock',
+ own_window_hints = 'below,undecorated,below,skip_taskbar,sticky,skip_pager',
+ own_window_transparent = true,
+
+ use_xft = true,
+ font = 'Hack:size=8.5',
+};
+
+conky.text = [[
+${color0}${font Arial:size=14}Gentoo Linux$font $alignr${kernel}$color
+$time$alignr$acpitemp°C
+$color${cpu cpu1}% ${cpu cpu2}% ${cpu cpu3}% ${cpu cpu4}%$alignr$mem ($memperc%)$font
+${cpugraph cpu1 32,40} ${cpugraph cpu2 32,40} ${cpugraph cpu3 32,40} ${cpugraph cpu4 32,40} $alignr${color1}${memgraph 32,40}$color
+
+${color0}${font DejaVu Sans:size=12}eth0: $font${if_up eth0}${addr eth0}$endif ${execi 2 ~/.conky/eth0info.sh} ${hr 3}$color ${if_up eth0}
${downspeed eth0} ${upspeed eth0} $alignr${color1}Sum$color ${totaldown eth0} ${totalup eth0}
-${downspeedgraph eth0 20,90} $alignr${upspeedgraph eth0 20,90} $endif
+${downspeedgraph eth0 32,125} $alignr${upspeedgraph eth0 32,125}$endif
-${if_up wlan0}${color0}${font DejaVu Sans:size=10}wlan0: $font${addr wlan0} ${hr 3}$color
+${if_up wlan0}${color0}${font DejaVu Sans:size=12}wlan0: $font${addr wlan0} ${hr 3}$color
$color${wireless_essid wlan0} $alignr${wireless_link_qual_perc wlan0}% ${wireless_bitrate wlan0}
${downspeed wlan0} ${upspeed wlan0} $alignr${color1}Sum$color ${totaldown wlan0} ${totalup wlan0}
-${downspeedgraph wlan0 20,90} $alignr${upspeedgraph wlan0 20,90}
+${downspeedgraph wlan0 32,125} $alignr${upspeedgraph wlan0 32,125}\
$endif\
-${if_up tun0}${color0}${font DejaVu Sans:size=10}tun0: $font${addr tun0} ${hr 3}$color
+${if_up bnep0}${color0}${font DejaVu Sans:size=12}bnep0: $font${addr bnep0} ${hr 3}$color
+${downspeed bnep0} ${upspeed bnep0} $alignr${color1}Sum$color ${totaldown bnep0} ${totalup bnep0}
+${downspeedgraph bnep0 32,125} $alignr${upspeedgraph bnep0 32,125}
+
+$endif\
+${if_up wg0}${color0}${font DejaVu Sans:size=12}wg0: $font${addr wg0} ${hr 3}$color
+${downspeed wg0} ${upspeed wg0} $alignr${color1}Sum$color ${totaldown wg0} ${totalup wg0}
+${downspeedgraph wg0 32,125} $alignr${upspeedgraph wg0 32,125}\
+
+$endif\
+${if_up tun0}${color0}${font DejaVu Sans:size=12}tun0: $font${addr tun0} ${hr 3}$color
${downspeed tun0} ${upspeed tun0} $alignr${color1}Sum$color ${totaldown tun0} ${totalup tun0}
-${downspeedgraph tun0 20,90} $alignr${upspeedgraph tun0 20,90}\
+${downspeedgraph tun0 32,125} $alignr${upspeedgraph tun0 32,125}\
$endif\
-${if_up dns0}${color0}${font DejaVu Sans:size=10}dns0: $font${addr dns0} ${hr 3}$color
-${downspeed dns0} ${upspeed dns0} $alignr${color1}Sum$color ${totaldown dns0} ${totalup dns0}
-${downspeedgraph dns0 20,90} $alignr${upspeedgraph dns0 20,90}
+${if_up tun1}${color0}${font DejaVu Sans:size=12}tun1: $font${addr tun1} ${hr 3}$color
+${downspeed tun1} ${upspeed tun1} $alignr${color1}Sum$color ${totaldown tun1} ${totalup tun1}
+${downspeedgraph tun1 32,125} $alignr${upspeedgraph tun1 32,125}\
$endif\
-${color0}${font DejaVu Sans:size=10}FS & Disc ${hr 3}$font$color
-${color1}ssd $color${fs_used /} / ${fs_size /} $alignr${fs_bar /}
-${if_mounted /media/storage}${color1}hdd $color${execi 60 ~/.conky/hddinfo.sh} $alignr${execibar 60 ~/.conky/hddbar.sh}
+${if_up dns0}${color0}${font DejaVu Sans:size=12}dns0: $font${addr dns0} ${hr 3}$color
+${downspeed dns0} ${upspeed dns0} $alignr${color1}Sum$color ${totaldown dns0} ${totalup dns0}
+${downspeedgraph dns0 32,125} $alignr${upspeedgraph dns0 32,125}
+
$endif\
-${color1}all $color${diskio_read} ${diskio_write} $alignr${color1}sdb $color${diskio_read sdb} ${diskio_write sdb}
-${diskiograph_read 20,42} ${diskiograph_write 20,42} $alignr${diskiograph_read sdb 20,42} ${diskiograph_write sdb 20,42}
+${color0}${font DejaVu Sans:size=12}FS & Disc ${hr 3}$font$color
+${color1}ssd $color${fs_used /} / ${fs_size /} $alignr${fs_bar 10,100 /}
${execi 5 ~/.conky/showmounts.sh}\
-${color0}${font DejaVu Sans:size=10}Top$font [$uptime_short, $processes] ${hr 3}$color
-${top name 1} ${top pid 1}${top cpu 1} ${top mem_res 1}
-${top name 2} ${top pid 2}${top cpu 2} ${top mem_res 2}
-${top name 3} ${top pid 3}${top cpu 3} ${top mem_res 3}
-${top name 4} ${top pid 4}${top cpu 4} ${top mem_res 4}
-${color1}By Mem$color
-${top_mem name 1} ${top_mem pid 1}${top_mem cpu 1} ${top_mem mem_res 1}
-${top_mem name 2} ${top_mem pid 2}${top_mem cpu 2} ${top_mem mem_res 2}
-${top_mem name 3} ${top_mem pid 3}${top_mem cpu 3} ${top_mem mem_res 3}
-${color1}By IO rd wr$color
-${top_io name 1} ${top_io pid 1} ${top_io io_read 1} ${top_io io_write 1}
-${top_io name 2} ${top_io pid 2} ${top_io io_read 2} ${top_io io_write 2}
-${top_io name 3} ${top_io pid 3} ${top_io io_read 3} ${top_io io_write 3}
-
-${color0}${font DejaVu Sans:size=10}Battery ${hr 3}$font$color
-$color${smapi bat 0 remaining_capacity} mWh (${smapi_bat_perc 0}%) $alignr${smapi_bat_bar 0}
- ${smapi bat 0 power_now} mW [${smapi bat 0 power_avg}, ${smapi bat 0 remaining_running_time} min]
-#${color1}${execi 6 ~/.conky/tempinfo.sh}$color
+${color1}all $color${diskio_read} ${diskio_write} $alignr${color1}sda $color${diskio_read sda} ${diskio_write sda}
+${diskiograph_read 32,55} ${diskiograph_write 32,55} $alignr${diskiograph_read sda 32,55} ${diskiograph_write sda 32,55}
+
+${color0}${font DejaVu Sans:size=12}Top$font [$uptime_short, $processes] ${hr 3}$color
+ ${top name 1} ${top pid 1}${top cpu 1} ${top mem_res 1}
+ ${top name 2} ${top pid 2}${top cpu 2} ${top mem_res 2}
+ ${top name 3} ${top pid 3}${top cpu 3} ${top mem_res 3}
+ ${top name 4} ${top pid 4}${top cpu 4} ${top mem_res 4}
+${color1}Mem:$color
+ ${top_mem name 1} ${top_mem pid 1}${top_mem cpu 1} ${top_mem mem_res 1}
+ ${top_mem name 2} ${top_mem pid 2}${top_mem cpu 2} ${top_mem mem_res 2}
+ ${top_mem name 3} ${top_mem pid 3}${top_mem cpu 3} ${top_mem mem_res 3}
+${color1}IO: rd wr$color
+ ${top_io name 1} ${top_io pid 1} ${top_io io_read 1} ${top_io io_write 1}
+ ${top_io name 2} ${top_io pid 2} ${top_io io_read 2} ${top_io io_write 2}
+ ${top_io name 3} ${top_io pid 3} ${top_io io_read 3} ${top_io io_write 3}
+
+${execi 10 ~/.conky/showmails.sh}
+${color0}${font DejaVu Sans:size=12}Battery ${hr 3}$font$color
+${execi 3 upower -i /org/freedesktop/UPower/devices/battery_BAT0 | grep energy-rate: | awk '{ printf "%4.1f %s", $2, $3}'} | ${execi 600 upower -i /org/freedesktop/UPower/devices/battery_BAT0 | grep energy-full: | sed 's/^.*: *\(.*\)$/\1/g'}$alignr${battery_percent BAT0}% ${battery_bar 10,100 BAT0}
+${execi 3 upower -i /org/freedesktop/UPower/devices/battery_BAT1 | grep energy-rate: | awk '{ printf "%4.1f %s", $2, $3}'} | ${execi 600 upower -i /org/freedesktop/UPower/devices/battery_BAT1 | grep energy-full: | sed 's/^.*: *\(.*\)$/\1/g'}$alignr${battery_percent BAT1}% ${battery_bar 10,100 BAT1}
+${execi 5 upower -i /org/freedesktop/UPower/devices/DisplayDevice | grep 'time to empty:' | awk '{ print $4 " " $5}'}${execi 5 upower -i /org/freedesktop/UPower/devices/DisplayDevice | grep 'time to full:' | awk '{ print $4 " " $5}'}$alignr${execi 5 upower -i /org/freedesktop/UPower/devices/DisplayDevice | grep percentage: | awk '{ printf "%4.1f", $2}'}% ${execibar 10 10,100 upower -i /org/freedesktop/UPower/devices/DisplayDevice | grep percentage: | awk '{ print $2}'}
+]];
--- /dev/null
+-- vim: ts=4 sw=4 noet ai cindent syntax=lua
+
+conky.config = {
+ alignment = 'bottom_left',
+ gap_y = 0,
+ maximum_width = 1600,
+
+ update_interval = 2,
+ cpu_avg_samples = 2,
+ net_avg_samples = 2,
+
+ default_color = '444',
+ color0 = '000',
+ color1 = '222',
+
+ draw_shades = false,
+ use_spacer = 'left',
+ top_name_width = 13,
+
+ if_up_strictness = 'address',
+ short_units = true,
+ no_buffers = true,
+
+ double_buffer = true,
+ own_window = true,
+ own_window_class = 'Conky',
+ own_window_type = 'dock',
+ own_window_hints = 'below,undecorated,below,skip_taskbar,sticky,skip_pager',
+ own_window_transparent = true,
+
+ use_xft = true,
+ font = 'Hack:size=8.5',
+};
+
+conky.text = [[
+${color1}${execi 2 tail -n 14 /tmp/messages}$color
+]]
--- /dev/null
+#!/bin/bash
+
+if ip link show dev eth0 | grep -q UP ; then
+ operstate=$(cat /sys/class/net/eth0/operstate | tr -d '\n')
+ echo -n "["
+ if [ "${operstate}" = "up" ]; then
+ #duplex=$(cat /sys/class/net/eth0/duplex | tr -d '\n')
+ speed=$(cat /sys/class/net/eth0/speed | tr -d '\n')
+ echo -n "${speed} Mbit"
+ else
+ echo -n "${operstate}"
+ fi
+ echo -n "]"
+else
+ echo -n "[power down]"
+fi
--- /dev/null
+#!/bin/sh
+
+df -h | grep /media/storage | awk ' { print $5 } '
--- /dev/null
+#!/bin/sh
+
+df -h | grep -m 1 /media/storage | awk ' { print $3 " / " $2 } '
--- /dev/null
+-- vim: ts=4 sw=4 noet ai cindent syntax=lua
+
+conky.config = {
+ alignment = 'bottom_left',
+ gap_y = 0,
+ maximum_width = 1600,
+
+ update_interval = 2,
+ cpu_avg_samples = 2,
+ net_avg_samples = 2,
+
+ default_color = '444',
+ color0 = '000',
+ color1 = '222',
+
+ draw_shades = false,
+ use_spacer = 'left',
+ top_name_width = 13,
+
+ if_up_strictness = 'address',
+ short_units = true,
+ no_buffers = true,
+
+ double_buffer = true,
+ own_window = true,
+ own_window_class = 'Conky',
+ own_window_type = 'dock',
+ own_window_hints = 'below,undecorated,below,skip_taskbar,sticky,skip_pager',
+ own_window_transparent = true,
+
+ use_xft = true,
+ font = 'Hack:size=8.5',
+};
+
+conky.text = [[
+${color1}${execi 2 journalctl -n 14 --no-hostname -q}$color
+]]
--- /dev/null
+#!/bin/sh
+
+for f in `find $HOME/.smailq/data -name "*.eml"`; do
+ to=`grep To: $f | tail -c +5 | head -c 15`
+ subj=`grep Subject: $f | tail -c +10`
+ echo "$to: $subj"
+done
#!/bin/sh
-df -h | grep '/dev/s[rd][c-z0-9]' | awk '{ print $1 "\t" $5 " " $6}' | sed "s_/dev/__" | sort
-df -h | grep '/dev/mmc*' | awk '{ print $1 "\t" $5 " " $6}' | sed "s_/dev/__" | sort
+
+for path in '/dev/s[rd][b-z0-9]' '/dev/mmc' '/dev/mapper/_' '//192' '/media/nas' '/media/fhs' '$HOME/.mount'; do
+ df -h 2>/dev/null | grep "$path" | awk '{ printf "%-25.25s %4s %4s\n", substr($6, length($6)-24), $4, $5 }'
+done
--- /dev/null
+-- vim: ts=4 sw=4 noet ai cindent syntax=lua
+
+conky.config = {
+ alignment = 'top_left',
+ gap_x = 10,
+ gap_y = 50,
+ maximum_width = 340,
+
+ update_interval = 2,
+ cpu_avg_samples = 2,
+ net_avg_samples = 2,
+
+ default_color = 'c0c0c0',
+ color0 = 'b21818',
+ color1 = 'ffffff',
+
+ draw_shades = false,
+ use_spacer = 'left',
+ top_name_width = 13,
+
+ if_up_strictness = 'address',
+ short_units = true,
+ no_buffers = true,
+
+ double_buffer = true,
+ own_window = true,
+ --own_window_colour = 'f8ecc7',
+ own_window_class = 'Conky',
+ own_window_type = 'desktop',
+ own_window_hints = 'below,undecorated,below,skip_taskbar,sticky,skip_pager',
+ --own_window_transparent = true,
+ own_window_argb_visual = true,
+ own_window_argb_value = 30,
+
+ use_xft = true,
+ font = 'Hack:size=8.5',
+};
+
+conky.text = [[
+${color0}${font Arial:size=14}Gentoo Linux$font $alignr${kernel}$color
+$time$alignr$acpitemp°C
+$color${cpu cpu1}% ${cpu cpu2}% ${cpu cpu3}% ${cpu cpu4}%$alignr$mem ($memperc%)$font
+${cpugraph cpu1 32,40} ${cpugraph cpu2 32,40} ${cpugraph cpu3 32,40} ${cpugraph cpu4 32,40} $alignr${color1}${memgraph 32,40}$color
+
+${color0}${font DejaVu Sans:size=12}eth0: $font${if_up eth0}${addr eth0}$endif ${execi 2 ~/.conky/eth0info.sh} ${hr 3}$color ${if_up eth0}
+${downspeed eth0} ${upspeed eth0} $alignr${color1}Sum$color ${totaldown eth0} ${totalup eth0}
+${downspeedgraph eth0 32,125} $alignr${upspeedgraph eth0 32,125}$endif
+
+${if_up wlan0}${color0}${font DejaVu Sans:size=12}wlan0: $font${addr wlan0} ${hr 3}$color
+$color${wireless_essid wlan0} $alignr${wireless_link_qual_perc wlan0}% ${wireless_bitrate wlan0}
+${downspeed wlan0} ${upspeed wlan0} $alignr${color1}Sum$color ${totaldown wlan0} ${totalup wlan0}
+${downspeedgraph wlan0 32,125} $alignr${upspeedgraph wlan0 32,125}\
+
+$endif\
+${if_up bnep0}${color0}${font DejaVu Sans:size=12}bnep0: $font${addr bnep0} ${hr 3}$color
+${downspeed bnep0} ${upspeed bnep0} $alignr${color1}Sum$color ${totaldown bnep0} ${totalup bnep0}
+${downspeedgraph bnep0 32,125} $alignr${upspeedgraph bnep0 32,125}
+
+$endif\
+${if_up wg0}${color0}${font DejaVu Sans:size=12}wg0: $font${addr wg0} ${hr 3}$color
+${downspeed wg0} ${upspeed wg0} $alignr${color1}Sum$color ${totaldown wg0} ${totalup wg0}
+${downspeedgraph wg0 32,125} $alignr${upspeedgraph wg0 32,125}\
+
+$endif\
+${if_up tun0}${color0}${font DejaVu Sans:size=12}tun0: $font${addr tun0} ${hr 3}$color
+${downspeed tun0} ${upspeed tun0} $alignr${color1}Sum$color ${totaldown tun0} ${totalup tun0}
+${downspeedgraph tun0 32,125} $alignr${upspeedgraph tun0 32,125}\
+
+$endif\
+${if_up tun1}${color0}${font DejaVu Sans:size=12}tun1: $font${addr tun1} ${hr 3}$color
+${downspeed tun1} ${upspeed tun1} $alignr${color1}Sum$color ${totaldown tun1} ${totalup tun1}
+${downspeedgraph tun1 32,125} $alignr${upspeedgraph tun1 32,125}\
+
+$endif\
+${if_up dns0}${color0}${font DejaVu Sans:size=12}dns0: $font${addr dns0} ${hr 3}$color
+${downspeed dns0} ${upspeed dns0} $alignr${color1}Sum$color ${totaldown dns0} ${totalup dns0}
+${downspeedgraph dns0 32,125} $alignr${upspeedgraph dns0 32,125}
+
+$endif\
+${color0}${font DejaVu Sans:size=12}FS & Disc ${hr 3}$font$color
+${color1}ssd $color${fs_used /} / ${fs_size /} $alignr${fs_bar 10,100 /}
+${execi 5 ~/.conky/showmounts.sh}\
+
+${color1}all $color${diskio_read} ${diskio_write} $alignr${color1}sda $color${diskio_read sda} ${diskio_write sda}
+${diskiograph_read 32,55} ${diskiograph_write 32,55} $alignr${diskiograph_read sda 32,55} ${diskiograph_write sda 32,55}
+
+${color0}${font DejaVu Sans:size=12}Top$font [$uptime_short, $processes] ${hr 3}$color
+ ${top name 1} ${top pid 1}${top cpu 1} ${top mem_res 1}
+ ${top name 2} ${top pid 2}${top cpu 2} ${top mem_res 2}
+ ${top name 3} ${top pid 3}${top cpu 3} ${top mem_res 3}
+ ${top name 4} ${top pid 4}${top cpu 4} ${top mem_res 4}
+${color1}Mem:$color
+ ${top_mem name 1} ${top_mem pid 1}${top_mem cpu 1} ${top_mem mem_res 1}
+ ${top_mem name 2} ${top_mem pid 2}${top_mem cpu 2} ${top_mem mem_res 2}
+ ${top_mem name 3} ${top_mem pid 3}${top_mem cpu 3} ${top_mem mem_res 3}
+${color1}IO: rd wr$color
+ ${top_io name 1} ${top_io pid 1} ${top_io io_read 1} ${top_io io_write 1}
+ ${top_io name 2} ${top_io pid 2} ${top_io io_read 2} ${top_io io_write 2}
+ ${top_io name 3} ${top_io pid 3} ${top_io io_read 3} ${top_io io_write 3}
+
+${execi 10 ~/.conky/showmails.sh}
+${color0}${font DejaVu Sans:size=12}Battery ${hr 3}$font$color
+${execi 3 upower -i /org/freedesktop/UPower/devices/battery_BAT0 | grep energy-rate: | awk '{ printf "%4.1f %s", $2, $3}'} | ${execi 600 upower -i /org/freedesktop/UPower/devices/battery_BAT0 | grep energy-full: | sed 's/^.*: *\(.*\)$/\1/g'}$alignr${battery_percent BAT0}% ${battery_bar 10,100 BAT0}
+${execi 3 upower -i /org/freedesktop/UPower/devices/battery_BAT1 | grep energy-rate: | awk '{ printf "%4.1f %s", $2, $3}'} | ${execi 600 upower -i /org/freedesktop/UPower/devices/battery_BAT1 | grep energy-full: | sed 's/^.*: *\(.*\)$/\1/g'}$alignr${battery_percent BAT1}% ${battery_bar 10,100 BAT1}
+${execi 5 upower -i /org/freedesktop/UPower/devices/DisplayDevice | grep 'time to empty:' | awk '{ print $4 " " $5}'}${execi 5 upower -i /org/freedesktop/UPower/devices/DisplayDevice | grep 'time to full:' | awk '{ print $4 " " $5}'}$alignr${execi 5 upower -i /org/freedesktop/UPower/devices/DisplayDevice | grep percentage: | awk '{ printf "%4.1f", $2}'}% ${execibar 10 10,100 upower -i /org/freedesktop/UPower/devices/DisplayDevice | grep percentage: | awk '{ print $2}'}
+]];
--- /dev/null
+#!/bin/dash
+#
+# Stefan Huber <shuber2@gmail.com>
+# Displays some temperature info
+
+
+if [ -f /proc/acpi/ibm/thermal ]
+then
+ info=`cat /proc/acpi/ibm/thermal | sed "s/^.*://" `
+
+ #1 ??, THM0, strongly reacts on heat at the cooling gills. reacts on cpu
+ #2 DVD: reacts on heat at the dvd drive
+ #3 express card: 31°C REACTS ON HEAT ON PC-CARD SLOT
+ #4 agp, gets active when switched to discrete graphics, reacts on load
+ #5 disappears when bat0 is plugged off --> ~50°C always
+ #6 thinkwiki thinks this is for bat1
+ #7 disappears when bat0 is plugged off --> ~val of bat temp through smapi
+ #8 thinkwiki thinks this is for bat1
+ #9 hdd: 33°C REACTS ON HEAD AT THE HARD DISC AREA
+ #10 igp, reacts on gtkperf
+ #11 heatsink? slowly reacts on heat at cooling gill. slowly reacts on cpu
+
+ cpusocket=`echo $info | awk ' { print $1 } '`
+ dvd=`echo $info | awk ' { print $2 } '`
+ excard=`echo $info | awk ' { print $3 } '`
+ atigpu=`echo $info | awk ' { print $4 } '`
+ hdd=`echo $info | awk ' { print $9 } '`
+ intelgpu=`echo $info | awk ' { print $10 } '`
+ heatsink=`echo $info | awk ' { print $11 } '`
+
+ #No equivalent in $info!! Reacts more directly to load than thm0. Due
+ #to acpi info, this is cpu.
+ cpu=`cat /sys/devices/virtual/thermal/thermal_zone1/temp | awk ' { print $1/1000 } '`
+
+ echo -n "cpu:$cpu°C cpus:$cpusocket°C"
+
+ if [ $intelgpu != "-1" ]; then
+ echo -n " igp:$intelgpu°C"
+ fi
+
+ if [ $atigpu != "-1" ]; then
+ echo -n " agp:$atigpu°C"
+ fi
+
+ echo ""
+ echo "hs:$heatsink°C ec:$excard°C hdd:$hdd°C dvd:$dvd°C"
+else
+ cpu=`cat /sys/devices/virtual/thermal/thermal_zone0/temp | awk ' { print $1/1000 } '`
+ echo "cpu: $cpu°C"
+fi
+
+
+
+
--- /dev/null
+-- vim: ts=4 sw=4 noet ai cindent syntax=lua
+
+conky.config = {
+ alignment = 'top_right',
+ gap_x = 5,
+ gap_y = 50,
+ maximum_width = 600,
+
+ update_interval = 2,
+ cpu_avg_samples = 2,
+ net_avg_samples = 2,
+
+ default_color = '444',
+ color0 = '000',
+ color1 = '222',
+
+ draw_shades = false,
+ use_spacer = 'left',
+ top_name_width = 13,
+
+ if_up_strictness = 'address',
+ short_units = true,
+ no_buffers = true,
+
+ double_buffer = true,
+ own_window = true,
+ own_window_colour = 'f8ecc7',
+ own_window_class = 'Conky',
+ own_window_type = 'dock',
+ own_window_hints = 'below,undecorated,below,skip_taskbar,sticky,skip_pager',
+ own_window_transparent = false,
+
+ use_xft = true,
+ font = 'Hack:size=10',
+};
+
+conky.text = [[
+${color0}${font Arial:size=14}Private$font$color ${hr 3}
+${color1}${execi 5 cat ~/.vimwiki/todos.wiki}$color
+
+${color0}${font Arial:size=14}FHS$font$color ${hr 3}
+${color1}${execi 5 cat ~/.vimwiki/FHS/todos.wiki}$color
+]]
projects / shutils.git / commitdiff