From: Stefan Huber Date: Tue, 20 Dec 2011 08:18:29 +0000 (+0100) Subject: removing tp_smapi-0.41 (in portage now) X-Git-Url: https://git.sthu.org/?p=shuber-gentoo-overlay.git;a=commitdiff_plain;h=61f4d0f4c95c7c9437d9bd4043c042ff845bad85 removing tp_smapi-0.41 (in portage now) --- diff --git a/app-laptop/tp_smapi/Manifest b/app-laptop/tp_smapi/Manifest deleted file mode 100644 index a0d2ad9..0000000 --- a/app-laptop/tp_smapi/Manifest +++ /dev/null @@ -1,4 +0,0 @@ -AUX tp_smapi-0.41-confd 785 RMD160 55d174b025625dd51e128baaaad2271fbddc3cab SHA1 a2a6d5198230da99dfbd3f451406ec9989b3ae49 SHA256 3996b08957adea6f14e5a0e394212026dc73e6802a8dcd5aa9a3b413530c3fdb -AUX tp_smapi-0.41-initd 1832 RMD160 154ac41defcd04f2edbc83d5ab71c4048f02835d SHA1 4ffd64701c8158b945b45ef46986876bc073d7c2 SHA256 a6f5096f52d2d9fdaa0e2be9a3b796f101ba109fa53816b7c515a400110de1af -DIST tp_smapi-0.41.tar.gz 38852 RMD160 e4db1b7449d0da741c1433396a4227d1274743f1 SHA1 ab222a41a2773bfa8a67c4b74343655dca6fb8be SHA256 6aef02b92d10360ac9be0db29ae390636be55017990063a092a285c70b54e666 -EBUILD tp_smapi-0.41.ebuild 1347 RMD160 e855695fbf13509f6697cab9ac83a16bc7389826 SHA1 55394b582d14c0aaa46a27227f7ad729e8d95d55 SHA256 bbacbf61dd06986822bc9285cafda47b10cf2974d1292ba83c7f0236d89ad982 diff --git a/app-laptop/tp_smapi/files/tp_smapi-0.41-confd b/app-laptop/tp_smapi/files/tp_smapi-0.41-confd deleted file mode 100644 index 7c80f35..0000000 --- a/app-laptop/tp_smapi/files/tp_smapi-0.41-confd +++ /dev/null @@ -1,20 +0,0 @@ -# /etc/conf.d/smapi: config file for /etc/init.d/smapi - -# use '/etc/init.d/smapi info' at any time to check the thresholds -# currently used by the driver -# Note that the kernel does some sanity checking on the values and -# will not accept any combination of values you may try to set up. -# (i.e. stop value lower than start) So if the output of info does -# not match what you wanted the driver probably did not like your -# configuration. - -# default thresholds for '/etc/init.d/smapi start' -SMAPI_THRESH_START="30" -SMAPI_THRESH_STOP="85" -# values to be used for '/etc/init.d/smapi low' -SMAPI_LOW_THRESH_START="${SMAPI_THRESH_START}" -SMAPI_LOW_THRESH_STOP="${SMAPI_THRESH_STOP}" - -# values to be used for '/etc/init.d/smapi high' -SMAPI_HIGH_THRESH_START="95" -SMAPI_HIGH_THRESH_STOP="100" diff --git a/app-laptop/tp_smapi/files/tp_smapi-0.41-initd b/app-laptop/tp_smapi/files/tp_smapi-0.41-initd deleted file mode 100755 index 4edb051..0000000 --- a/app-laptop/tp_smapi/files/tp_smapi-0.41-initd +++ /dev/null @@ -1,92 +0,0 @@ -#!/sbin/runscript -# Copyright (C) 2011 Henning Schild -# Copyright (C) 2011 Sebastian Pipping -# -# Distributed under the terms of the GNU General Public License, v2 or later - -opts="low high info" - -SMAPI_SYSFS="/sys/devices/platform/smapi" -BATS="BAT0 BAT1" - -depend() { - after modules -} - -start() { - local state1 - local state2 - - ebegin "Making sure that module 'tp_smapi' is loaded" - modprobe tp_smapi - state1=$? - eend ${state1} - - ebegin "Checking for \"${SMAPI_SYSFS}\"" - test -d "${SMAPI_SYSFS}" - state2=$? - eend ${state2} - - if [ "${state1}" -ne "0" ] || [ "${state2}" -ne "0" ]; then - return 1 - fi - - ebegin "Starting ${SVCNAME}" - set_all ${SMAPI_THRESH_START} ${SMAPI_THRESH_STOP} - eend $? -} - -stop() { - einfo "Nothing required to be done to stop ${SVCNAME}" -} - -require_started() { - if ! service_started; then - "${RC_SERVICE}" start || return $? - fi -} - -high() { - require_started - - einfo "Switching ${SVCNAME} to high thesholds" - set_all ${SMAPI_HIGH_THRESH_START} ${SMAPI_HIGH_THRESH_STOP} -} - -low() { - require_started - - einfo "Switching ${SVCNAME} to low thesholds" - set_all ${SMAPI_LOW_THRESH_START} ${SMAPI_LOW_THRESH_STOP} -} - -set_all() { - local tstart=$1 - local tstop=$2 - local bat - - for bat in ${BATS}; do - ebegin " setting thresholds for ${bat}: $tstart $tstop" - echo ${tstart} > ${SMAPI_SYSFS}/${bat}/start_charge_thresh - echo ${tstop} > ${SMAPI_SYSFS}/${bat}/stop_charge_thresh - eend $? - done -} - -info() { - local presence - local tstart - local tstop - local bat - - require_started - - for bat in ${BATS}; do - tstart=$(cat ${SMAPI_SYSFS}/${bat}/start_charge_thresh) - tstop=$(cat ${SMAPI_SYSFS}/${bat}/stop_charge_thresh) - if [ "$(cat ${SMAPI_SYSFS}/${bat}/installed)" -eq "1" ]; then - presence=" [installed]" - fi - einfo "${bat}: ${tstart} ${tstop}${presence}" - done -} diff --git a/app-laptop/tp_smapi/tp_smapi-0.41.ebuild b/app-laptop/tp_smapi/tp_smapi-0.41.ebuild deleted file mode 100644 index 90c8f5f..0000000 --- a/app-laptop/tp_smapi/tp_smapi-0.41.ebuild +++ /dev/null @@ -1,60 +0,0 @@ -EAPI=4 - -inherit eutils linux-mod - -DESCRIPTION="IBM ThinkPad SMAPI BIOS driver" -HOMEPAGE="http://tpctl.sourceforge.net/" -SRC_URI="http://github.com/downloads/evgeni/tp_smapi/${P}.tar.gz" - -LICENSE="GPL-2" -SLOT="0" -RESTRICT="mirror" -KEYWORDS="~amd64 ~x86" - -IUSE="hdaps" - - -# We need dmideode if the kernel does not support DMI_DEV_TYPE_OEM_STRING -# in dmi.h -DEPEND="sys-apps/dmidecode" -RDEPEND="${DEPEND}" - -pkg_pretend() { - linux-mod_pkg_setup - - if kernel_is lt 2 6 19; then - eerror - eerror "${P} requires Linux kernel 2.6.19 or above." - eerror - die "Unsupported kernel version" - fi - - MODULE_NAMES="thinkpad_ec(extra:) tp_smapi(extra:)" - BUILD_PARAMS="KSRC=${KV_DIR} KBUILD=${KV_OUT_DIR}" - BUILD_TARGETS="default" - - if use hdaps; then - CONFIG_CHECK="~INPUT_UINPUT" - WARNING_INPUT_UINPUT="Your kernel needs uinput for the hdaps module to perform better" - linux-info_pkg_setup - - MODULE_NAMES="${MODULE_NAMES} hdaps(extra:)" - BUILD_PARAMS="${BUILD_PARAMS} HDAPS=1" - - CONFIG_CHECK="!SENSORS_HDAPS" - ERROR_SENSORS_HDAPS="${P} with USE=hdaps conflicts with in-kernel HDAPS (CONFIG_SENSORS_HDAPS)" - linux-info_pkg_setup - fi -} - -pkg_setup() { - # run again as pkg_pretend is not var safe - pkg_pretend -} - -src_install() { - linux-mod_src_install - dodoc CHANGES README - newinitd "${FILESDIR}"/${P}-initd smapi - newconfd "${FILESDIR}"/${P}-confd smapi -}