removing tp_smapi-0.41 (in portage now)

diff --git a/app-laptop/tp_smapi/Manifest b/app-laptop/tp_smapi/Manifest
deleted file mode 100644 (file)
index a0d2ad9..0000000
--- a/app-laptop/tp_smapi/Manifest
+++ /dev/null
@@ -1,4 +0,0 @@
-AUX tp_smapi-0.41-confd 785 RMD160 55d174b025625dd51e128baaaad2271fbddc3cab SHA1 a2a6d5198230da99dfbd3f451406ec9989b3ae49 SHA256 3996b08957adea6f14e5a0e394212026dc73e6802a8dcd5aa9a3b413530c3fdb
-AUX tp_smapi-0.41-initd 1832 RMD160 154ac41defcd04f2edbc83d5ab71c4048f02835d SHA1 4ffd64701c8158b945b45ef46986876bc073d7c2 SHA256 a6f5096f52d2d9fdaa0e2be9a3b796f101ba109fa53816b7c515a400110de1af
-DIST tp_smapi-0.41.tar.gz 38852 RMD160 e4db1b7449d0da741c1433396a4227d1274743f1 SHA1 ab222a41a2773bfa8a67c4b74343655dca6fb8be SHA256 6aef02b92d10360ac9be0db29ae390636be55017990063a092a285c70b54e666
-EBUILD tp_smapi-0.41.ebuild 1347 RMD160 e855695fbf13509f6697cab9ac83a16bc7389826 SHA1 55394b582d14c0aaa46a27227f7ad729e8d95d55 SHA256 bbacbf61dd06986822bc9285cafda47b10cf2974d1292ba83c7f0236d89ad982

diff --git a/app-laptop/tp_smapi/files/tp_smapi-0.41-confd b/app-laptop/tp_smapi/files/tp_smapi-0.41-confd
deleted file mode 100644 (file)
index 7c80f35..0000000
--- a/app-laptop/tp_smapi/files/tp_smapi-0.41-confd
+++ /dev/null
@@ -1,20 +0,0 @@
-# /etc/conf.d/smapi: config file for /etc/init.d/smapi
-
-# use '/etc/init.d/smapi info' at any time to check the thresholds
-# currently used by the driver
-# Note that the kernel does some sanity checking on the values and
-# will not accept any combination of values you may try to set up.
-# (i.e. stop value lower than start) So if the output of info does
-# not match what you wanted the driver probably did not like your
-# configuration.
-
-# default thresholds for '/etc/init.d/smapi start'
-SMAPI_THRESH_START="30"
-SMAPI_THRESH_STOP="85"
-# values to be used for '/etc/init.d/smapi low'
-SMAPI_LOW_THRESH_START="${SMAPI_THRESH_START}"
-SMAPI_LOW_THRESH_STOP="${SMAPI_THRESH_STOP}"
-
-# values to be used for '/etc/init.d/smapi high'
-SMAPI_HIGH_THRESH_START="95"
-SMAPI_HIGH_THRESH_STOP="100"

diff --git a/app-laptop/tp_smapi/files/tp_smapi-0.41-initd b/app-laptop/tp_smapi/files/tp_smapi-0.41-initd
deleted file mode 100755 (executable)
index 4edb051..0000000
--- a/app-laptop/tp_smapi/files/tp_smapi-0.41-initd
+++ /dev/null
@@ -1,92 +0,0 @@
-#!/sbin/runscript
-# Copyright (C) 2011 Henning Schild <henning@wh9.tu-dresden.de>
-# Copyright (C) 2011 Sebastian Pipping <sebastian@pipping.org>
-#
-# Distributed under the terms of the GNU General Public License, v2 or later
-
-opts="low high info"
-
-SMAPI_SYSFS="/sys/devices/platform/smapi"
-BATS="BAT0 BAT1"
-
-depend() {
-       after modules
-}
-
-start() {
-       local state1
-       local state2
-
-       ebegin "Making sure that module 'tp_smapi' is loaded"
-       modprobe tp_smapi
-       state1=$?
-       eend ${state1}
-
-       ebegin "Checking for \"${SMAPI_SYSFS}\""
-       test -d "${SMAPI_SYSFS}"
-       state2=$?
-       eend ${state2}
-
-       if [ "${state1}" -ne "0" ] || [ "${state2}" -ne "0" ]; then
-               return 1
-       fi
-
-       ebegin "Starting ${SVCNAME}"
-       set_all ${SMAPI_THRESH_START} ${SMAPI_THRESH_STOP}
-       eend $?
-}
-
-stop() {
-       einfo "Nothing required to be done to stop ${SVCNAME}"
-}
-
-require_started() {
-       if ! service_started; then
-               "${RC_SERVICE}" start || return $?
-       fi
-}
-
-high() {
-       require_started
-
-       einfo "Switching ${SVCNAME} to high thesholds"
-       set_all ${SMAPI_HIGH_THRESH_START} ${SMAPI_HIGH_THRESH_STOP}
-}
-
-low() {
-       require_started
-
-       einfo "Switching ${SVCNAME} to low thesholds"
-       set_all ${SMAPI_LOW_THRESH_START} ${SMAPI_LOW_THRESH_STOP}
-}
-
-set_all() {
-       local tstart=$1
-       local tstop=$2
-       local bat
-
-       for bat in ${BATS}; do
-               ebegin "  setting thresholds for ${bat}: $tstart $tstop"
-               echo ${tstart} > ${SMAPI_SYSFS}/${bat}/start_charge_thresh
-               echo ${tstop} > ${SMAPI_SYSFS}/${bat}/stop_charge_thresh
-               eend $?
-       done
-}
-
-info() {
-       local presence
-       local tstart
-       local tstop
-       local bat
-
-       require_started
-
-       for bat in ${BATS}; do
-               tstart=$(cat ${SMAPI_SYSFS}/${bat}/start_charge_thresh)
-               tstop=$(cat ${SMAPI_SYSFS}/${bat}/stop_charge_thresh)
-               if [ "$(cat ${SMAPI_SYSFS}/${bat}/installed)" -eq "1" ]; then
-                       presence="  [installed]"
-               fi
-               einfo "${bat}: ${tstart} ${tstop}${presence}"
-       done
-}

diff --git a/app-laptop/tp_smapi/tp_smapi-0.41.ebuild b/app-laptop/tp_smapi/tp_smapi-0.41.ebuild
deleted file mode 100644 (file)
index 90c8f5f..0000000
--- a/app-laptop/tp_smapi/tp_smapi-0.41.ebuild
+++ /dev/null
@@ -1,60 +0,0 @@
-EAPI=4
-
-inherit eutils linux-mod
-
-DESCRIPTION="IBM ThinkPad SMAPI BIOS driver"
-HOMEPAGE="http://tpctl.sourceforge.net/"
-SRC_URI="http://github.com/downloads/evgeni/tp_smapi/${P}.tar.gz"
-
-LICENSE="GPL-2"
-SLOT="0"
-RESTRICT="mirror"
-KEYWORDS="~amd64 ~x86"
-
-IUSE="hdaps"
-
-
-# We need dmideode if the kernel does not support DMI_DEV_TYPE_OEM_STRING
-# in dmi.h
-DEPEND="sys-apps/dmidecode"
-RDEPEND="${DEPEND}"
-
-pkg_pretend() {
-       linux-mod_pkg_setup
-
-       if kernel_is lt 2 6 19; then
-               eerror
-               eerror "${P} requires Linux kernel 2.6.19 or above."
-               eerror
-               die "Unsupported kernel version"
-       fi
-
-       MODULE_NAMES="thinkpad_ec(extra:) tp_smapi(extra:)"
-       BUILD_PARAMS="KSRC=${KV_DIR} KBUILD=${KV_OUT_DIR}"
-       BUILD_TARGETS="default"
-
-       if use hdaps; then
-               CONFIG_CHECK="~INPUT_UINPUT"
-               WARNING_INPUT_UINPUT="Your kernel needs uinput for the hdaps module to perform better"
-               linux-info_pkg_setup
-
-               MODULE_NAMES="${MODULE_NAMES} hdaps(extra:)"
-               BUILD_PARAMS="${BUILD_PARAMS} HDAPS=1"
-
-               CONFIG_CHECK="!SENSORS_HDAPS"
-               ERROR_SENSORS_HDAPS="${P} with USE=hdaps conflicts with in-kernel HDAPS (CONFIG_SENSORS_HDAPS)"
-               linux-info_pkg_setup
-       fi
-}
-
-pkg_setup() {
-       # run again as pkg_pretend is not var safe
-       pkg_pretend
-}
-
-src_install() {
-       linux-mod_src_install
-       dodoc CHANGES README
-       newinitd "${FILESDIR}"/${P}-initd smapi
-       newconfd "${FILESDIR}"/${P}-confd smapi
-}