X-Git-Url: https://git.sthu.org/?p=shuber-gentoo-overlay.git;a=blobdiff_plain;f=app-laptop%2Ftp_smapi%2Ffiles%2Ftp_smapi-0.41-confd;fp=app-laptop%2Ftp_smapi%2Ffiles%2Ftp_smapi-0.41-confd;h=0000000000000000000000000000000000000000;hp=7c80f35e390bd42a71453787b788a1d17b2dd31e;hb=61f4d0f4c95c7c9437d9bd4043c042ff845bad85;hpb=d292e832a6a8922e45c37ac2d9dc37738dec7128

diff --git a/app-laptop/tp_smapi/files/tp_smapi-0.41-confd b/app-laptop/tp_smapi/files/tp_smapi-0.41-confd
deleted file mode 100644
index 7c80f35..0000000
--- a/app-laptop/tp_smapi/files/tp_smapi-0.41-confd
+++ /dev/null
@@ -1,20 +0,0 @@
-# /etc/conf.d/smapi: config file for /etc/init.d/smapi
-
-# use '/etc/init.d/smapi info' at any time to check the thresholds
-# currently used by the driver
-# Note that the kernel does some sanity checking on the values and
-# will not accept any combination of values you may try to set up.
-# (i.e. stop value lower than start) So if the output of info does
-# not match what you wanted the driver probably did not like your
-# configuration.
-
-# default thresholds for '/etc/init.d/smapi start'
-SMAPI_THRESH_START="30"
-SMAPI_THRESH_STOP="85"
-# values to be used for '/etc/init.d/smapi low'
-SMAPI_LOW_THRESH_START="${SMAPI_THRESH_START}"
-SMAPI_LOW_THRESH_STOP="${SMAPI_THRESH_STOP}"
-
-# values to be used for '/etc/init.d/smapi high'
-SMAPI_HIGH_THRESH_START="95"
-SMAPI_HIGH_THRESH_STOP="100"