From: Stefan Huber <shuber2@gmail.com>
Date: Wed, 28 Sep 2011 15:07:40 +0000 (+0200)
Subject: add app-laptop/tp_smapi-0.41
X-Git-Url: https://git.sthu.org/?a=commitdiff_plain;h=9d90e2d7e3f82500cc95d884a92c3b280007770d;p=shuber-gentoo-overlay.git

add app-laptop/tp_smapi-0.41
---

diff --git a/app-laptop/tp_smapi/Manifest b/app-laptop/tp_smapi/Manifest
new file mode 100644
index 0000000..a0d2ad9
--- /dev/null
+++ b/app-laptop/tp_smapi/Manifest
@@ -0,0 +1,4 @@
+AUX tp_smapi-0.41-confd 785 RMD160 55d174b025625dd51e128baaaad2271fbddc3cab SHA1 a2a6d5198230da99dfbd3f451406ec9989b3ae49 SHA256 3996b08957adea6f14e5a0e394212026dc73e6802a8dcd5aa9a3b413530c3fdb
+AUX tp_smapi-0.41-initd 1832 RMD160 154ac41defcd04f2edbc83d5ab71c4048f02835d SHA1 4ffd64701c8158b945b45ef46986876bc073d7c2 SHA256 a6f5096f52d2d9fdaa0e2be9a3b796f101ba109fa53816b7c515a400110de1af
+DIST tp_smapi-0.41.tar.gz 38852 RMD160 e4db1b7449d0da741c1433396a4227d1274743f1 SHA1 ab222a41a2773bfa8a67c4b74343655dca6fb8be SHA256 6aef02b92d10360ac9be0db29ae390636be55017990063a092a285c70b54e666
+EBUILD tp_smapi-0.41.ebuild 1347 RMD160 e855695fbf13509f6697cab9ac83a16bc7389826 SHA1 55394b582d14c0aaa46a27227f7ad729e8d95d55 SHA256 bbacbf61dd06986822bc9285cafda47b10cf2974d1292ba83c7f0236d89ad982
diff --git a/app-laptop/tp_smapi/files/tp_smapi-0.41-confd b/app-laptop/tp_smapi/files/tp_smapi-0.41-confd
new file mode 100644
index 0000000..7c80f35
--- /dev/null
+++ b/app-laptop/tp_smapi/files/tp_smapi-0.41-confd
@@ -0,0 +1,20 @@
+# /etc/conf.d/smapi: config file for /etc/init.d/smapi
+
+# use '/etc/init.d/smapi info' at any time to check the thresholds
+# currently used by the driver
+# Note that the kernel does some sanity checking on the values and
+# will not accept any combination of values you may try to set up.
+# (i.e. stop value lower than start) So if the output of info does
+# not match what you wanted the driver probably did not like your
+# configuration.
+
+# default thresholds for '/etc/init.d/smapi start'
+SMAPI_THRESH_START="30"
+SMAPI_THRESH_STOP="85"
+# values to be used for '/etc/init.d/smapi low'
+SMAPI_LOW_THRESH_START="${SMAPI_THRESH_START}"
+SMAPI_LOW_THRESH_STOP="${SMAPI_THRESH_STOP}"
+
+# values to be used for '/etc/init.d/smapi high'
+SMAPI_HIGH_THRESH_START="95"
+SMAPI_HIGH_THRESH_STOP="100"
diff --git a/app-laptop/tp_smapi/files/tp_smapi-0.41-initd b/app-laptop/tp_smapi/files/tp_smapi-0.41-initd
new file mode 100755
index 0000000..4edb051
--- /dev/null
+++ b/app-laptop/tp_smapi/files/tp_smapi-0.41-initd
@@ -0,0 +1,92 @@
+#!/sbin/runscript
+# Copyright (C) 2011 Henning Schild <henning@wh9.tu-dresden.de>
+# Copyright (C) 2011 Sebastian Pipping <sebastian@pipping.org>
+#
+# Distributed under the terms of the GNU General Public License, v2 or later
+
+opts="low high info"
+
+SMAPI_SYSFS="/sys/devices/platform/smapi"
+BATS="BAT0 BAT1"
+
+depend() {
+	after modules
+}
+
+start() {
+	local state1
+	local state2
+
+	ebegin "Making sure that module 'tp_smapi' is loaded"
+	modprobe tp_smapi
+	state1=$?
+	eend ${state1}
+
+	ebegin "Checking for \"${SMAPI_SYSFS}\""
+	test -d "${SMAPI_SYSFS}"
+	state2=$?
+	eend ${state2}
+
+	if [ "${state1}" -ne "0" ] || [ "${state2}" -ne "0" ]; then
+		return 1
+	fi
+
+	ebegin "Starting ${SVCNAME}"
+	set_all ${SMAPI_THRESH_START} ${SMAPI_THRESH_STOP}
+	eend $?
+}
+
+stop() {
+	einfo "Nothing required to be done to stop ${SVCNAME}"
+}
+
+require_started() {
+	if ! service_started; then
+		"${RC_SERVICE}" start || return $?
+	fi
+}
+
+high() {
+	require_started
+
+	einfo "Switching ${SVCNAME} to high thesholds"
+	set_all ${SMAPI_HIGH_THRESH_START} ${SMAPI_HIGH_THRESH_STOP}
+}
+
+low() {
+	require_started
+
+	einfo "Switching ${SVCNAME} to low thesholds"
+	set_all ${SMAPI_LOW_THRESH_START} ${SMAPI_LOW_THRESH_STOP}
+}
+
+set_all() {
+	local tstart=$1
+	local tstop=$2
+	local bat
+
+	for bat in ${BATS}; do
+		ebegin "  setting thresholds for ${bat}: $tstart $tstop"
+		echo ${tstart} > ${SMAPI_SYSFS}/${bat}/start_charge_thresh
+		echo ${tstop} > ${SMAPI_SYSFS}/${bat}/stop_charge_thresh
+		eend $?
+	done
+}
+
+info() {
+	local presence
+	local tstart
+	local tstop
+	local bat
+
+	require_started
+
+	for bat in ${BATS}; do
+		tstart=$(cat ${SMAPI_SYSFS}/${bat}/start_charge_thresh)
+		tstop=$(cat ${SMAPI_SYSFS}/${bat}/stop_charge_thresh)
+		if [ "$(cat ${SMAPI_SYSFS}/${bat}/installed)" -eq "1" ]; then
+			presence="  [installed]"
+		fi
+		einfo "${bat}: ${tstart} ${tstop}${presence}"
+	done
+}
diff --git a/app-laptop/tp_smapi/tp_smapi-0.41.ebuild b/app-laptop/tp_smapi/tp_smapi-0.41.ebuild
new file mode 100644
index 0000000..90c8f5f
--- /dev/null
+++ b/app-laptop/tp_smapi/tp_smapi-0.41.ebuild
@@ -0,0 +1,60 @@
+EAPI=4
+
+inherit eutils linux-mod
+
+DESCRIPTION="IBM ThinkPad SMAPI BIOS driver"
+HOMEPAGE="http://tpctl.sourceforge.net/"
+SRC_URI="http://github.com/downloads/evgeni/tp_smapi/${P}.tar.gz"
+
+LICENSE="GPL-2"
+SLOT="0"
+RESTRICT="mirror"
+KEYWORDS="~amd64 ~x86"
+
+IUSE="hdaps"
+
+
+# We need dmideode if the kernel does not support DMI_DEV_TYPE_OEM_STRING
+# in dmi.h
+DEPEND="sys-apps/dmidecode"
+RDEPEND="${DEPEND}"
+
+pkg_pretend() {
+	linux-mod_pkg_setup
+
+	if kernel_is lt 2 6 19; then
+		eerror
+		eerror "${P} requires Linux kernel 2.6.19 or above."
+		eerror
+		die "Unsupported kernel version"
+	fi
+
+	MODULE_NAMES="thinkpad_ec(extra:) tp_smapi(extra:)"
+	BUILD_PARAMS="KSRC=${KV_DIR} KBUILD=${KV_OUT_DIR}"
+	BUILD_TARGETS="default"
+
+	if use hdaps; then
+		CONFIG_CHECK="~INPUT_UINPUT"
+		WARNING_INPUT_UINPUT="Your kernel needs uinput for the hdaps module to perform better"
+		linux-info_pkg_setup
+
+		MODULE_NAMES="${MODULE_NAMES} hdaps(extra:)"
+		BUILD_PARAMS="${BUILD_PARAMS} HDAPS=1"
+
+		CONFIG_CHECK="!SENSORS_HDAPS"
+		ERROR_SENSORS_HDAPS="${P} with USE=hdaps conflicts with in-kernel HDAPS (CONFIG_SENSORS_HDAPS)"
+		linux-info_pkg_setup
+	fi
+}
+
+pkg_setup() {
+	# run again as pkg_pretend is not var safe
+	pkg_pretend
+}
+
+src_install() {
+	linux-mod_src_install
+	dodoc CHANGES README
+	newinitd "${FILESDIR}"/${P}-initd smapi
+	newconfd "${FILESDIR}"/${P}-confd smapi
+}